Beka Toy chest Manuel d'utilisateur télécharger pdf

Beka, Inc. • 542 Selby Avenue • St. Paul, Minnesota 55102 • USA

1-888-999-2352 • www.bekainc.com • 651-222-3965 fax

TOY CHEST

Parts:

Baltic Birch Hardware:

1 – 1/2” X 11-3/4” X 22-3/4” Back 4 – Casters

1 – 1/2” X 11-3/4” X 22-3/4” Bottom 1 – 3/4” X 21-1/4” Dowel

2 – 1/2” X 13-5/8” X 13-5/8” Cart Sides 8 – 10 X 1-1/4” Phillips, Flat Head Screws

1 – 1/2” X 6-1/4” X 23-1/4” Front Piece 8 – 10 X 1-1/4” Phillips, Truss Head Screws

Hard Maple

2 – 1-3/8” X 1-3/8” X 15” Back Supports

2 – 1- 3/8” X 1-3/8” X 13-5/8” Bottom Supports

Assembly Instructions:

Fig. 1

Step 2)

Using flat head screws, attach back (recessed

holes out) to one back support. Make sure the

large “dowel hole” faces inward, as shown.

Fig. 2

Model # 06201

Step 1)

Using flat head screws, attach the bottom

(recessed holes up) to the bottom supports. Make

sure the large “caster holes” face down and the

predrilled hole closest to the end of each support

is near the edge. The bottom assembly should

look like figure 1.

Step 3)

Insert dowel into remaining back support and then

into the previously attached back support. Next,

secure unattached back support to back, again us-

ing flat head screws. The back assembly should

now look like figure 3.

Fig. 3

1 2

Beka, Inc. • 542 Selby Avenue • St. Paul, Minnesota 55102 • USA 1-888-999-2352 • www.bekainc.com • 651-222-3965 fax TOY CHEST Parts:

Step 5) Using the remaining truss head screws attach the back assembly to the same side piece. Attach re-maining chest side, holding the bottom and b

Pas de commentaire

Beka Toy chest Manuel d'utilisateur